Products Quickfinder

fc dali 3e DALI sequencer

feno control
Description Technical Details

Colored light controller for DALI control gear for additive color mixing with red, green and blue fluorescent lamps. The result is an automatic color chase from blue to turquoise, green, yellow, red and magenta with soft fading in an endless loop. The speed of the preprogrammed chase changes as a function of the analog 1-10 V input voltage. A linear 100 kW potentiometer can also be used. In the lowest potentiometer setting or at a control voltage of less than 1.2 V all the connected ECGs are switched off. A separate mains switch is not needed. 

If the control voltage is increased the chase at first runs at its highest speed and slows down as the voltage increases. At a control voltage of more than 9.8 V the current color is fixed and will not change again. Up to four ECGs can be connected to each DALI output. The three separate DALI cables are conventionally wired individually to the ballasts. There is therefore no need for DALI addressing, and ballasts can be added or replaced at any time.